Filter By:
- Body Care (2)
- Car Racks (11)
- Child Seats (4)
- Electronics (7)
- Fenders (8)
- Hydration (15)
- Lighting (17)
- Locks/Security (17)
- Show More Categories
- Nutrition (6)
- Packs/Racks/Baskets (35)
- Pumps/Inflation (12)
- Safety (11)
- Tools/Maintenance (57)
- Trailers/Strollers (6)
- Indoor Cycling (6)
- Other (7)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Accessories

$5.99 - $11.95
TB-1085: Removes Shimano® MF freewheels. Use with 21mm wrench or 1/2” Drive ratchet wrench.
TB-1045: Removes Shimano® MF freewheels . Use with an adjustable” or 24 mm wrench. Available to work with TB-FW10 or TB –FW20 while disassembling. TB-1045 can be turned with TB-8830.

$31.95
An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible.
- 100% anodized aluminum
- LockTight Wings
- Laser etched design
- Road and MTB approved
- High-end and durable

$19.95 - $39.95
Shimano Hydraulic Disc Brake Fluid
- Non-corrosive mineral oil that offers excellent heat expansion properties
- Mineral oil will not absorb water from the air
- Not caustic and is non-toxic

$28.95
Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port)
Features:
- Oil spill guard lid with an integrated oil stopper holder
- Funnel base
- Bleeding instructions available for download under 'Documents & Links' below

$69.99
Coming up with ways to make you safer on the road, when using Serfas lights, is a top priority. Their "BLAST" Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10-minute runtime in that specific mode.
How It Works:
- When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute.
- When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times.*
- Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached.
- While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete.
- Light emits a beep when power button is pushed & light goes from mode to mode.
Features:
- "Blast" Audible Warning System Alerts Rider Of Low Battery
- Design Easily Fits Aero Applications
- Low Flash Lasts Up To 14.5 hours
- Extra Long Mounting Straps For Endless Mounting Options
Specs:
- Solids Modes: High (40 Lumens): 2.25 hrs & Low (10 Lumens): 7.75 hrs
- Flash Modes: High (40 Lumens): 4 hrs & Low (10 Lumens): 15.25 hrs
- Weight: 48 Grams Without Bracket
- Battery: USB Rechargeable Li-Polymer

$9.99
Replacement Part – Universal Handlebar Bracket
- Fits all current Serfas headlights with a removable bracket
- Fits bars up to 31.8mm horizontal & vertical adjustable
- Easily removes from bar in seconds
- No tools needed
- Works With:
TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP
- Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

$64.95
The SRAM chain wear indicator tool is compatible with all the existing SRAM chain models and this includes HARD CHROME and non-HARD CHROME chain technology with a 0.8% wear critical specification.

$19.95
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes
- Brake Fluid Type: DOT 5.1
- Bottle Size (Brake Fluid): 4 oz
- Application (Brake Fluid): Disc Brakes

$59.95
- For installing DUB BSA bottom brackets
- Compatible with a 3/8-inch drive torque wrench so you can torque to spec

$14.70
Mudguard set for front and rear.
– 45mm with fixed bridges
– 3mm stainless steel stays
– Front angle, sliding bridges, and fixed bridges made from stainless steel
– Security fastening ASR joint, angle adjustable

$12.95
The Bottle Cage Adapter lets you fasten a bottle cage to any round tube on your bike. Angle adjustment ensures your bottle is always properly positioned.

$14.95
Keep your pants clean with SKS's Chainboard chain guard. This handy device bolts onto the chainstay and bottom bracket, and utilizes a telescoping design to fit a wide variety of frames.

$32.50
Following a design update, the HIGHTREK clip-on mudguard set impresses with its sporty look. It can be mounted to seat tube diameters of between 28 and 32mm. The well-thought-out universal fastener and clip enable the mudguard to be mounted and removed quickly without any tools.

$20.95
SKS's Race Bag fastens to your saddle's rails and quickly detaches with a twist. Plenty of sizes ensure you can get one to fit your needs. A separate compartment for a multi-tool keeps your tube safe. And, the reflective accents add visibility in low-light situations.

$15.95
SKS's Rennkompressor Floor Pump is a legend. For over four decades, this German work of art has been the go-to pump for countless cyclists the world over. The E.V.A. head works with all valves and the 230 psi/16 bar max pressure can fill even the highest quality track tubulars. Sturdy aluminum construction, an oversize gauge, and a long hose will make it your go-to pump, as well.

$44.95
SKS's Tool Wrap is made from sturdy nylon fabric and fastens easily to your bike's frame with Velcro straps. This tool wrap features individual compartments for your pump, mini tools, tire levers and more to keep your on-the-go repair essentials organized.

$16.95
Keep the ride alive with SKS's Toolbox Race. Its molded-plastic body provides an excellent gripping surface and splits in two for easy access. Included in the set are: 2, 2.5, 3, 4, 5, 6 and 8mm Allen keys; T20 and T25 Torx; 8 and 10mm ring spanners; flat and Phillips screwdrivers; two tire levers; and a 14/15g spoke wrench.

$10.95
The lightweight VELOCAGE weighs a mere 40 grams and features a sporty look, maintaining an absolutely secure hold, whether you're riding on the street or over rougher terrain. Its stable clamp and sturdy construction firmly encase the bottle on all sides. All commonly available bicycle bottles can be easily inserted and removed.

$36.95
- Required to bleed Reverb 1x remotes
- Compatible with Standard RockShox bleed kits
- Included with remote upgrade kit and Reverb 1x post
- Not compatible with SRAM brakes bleeding edge fitting

$129.99
Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

$67.99
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

$23.00 - $33.95
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Deep side skirts protect stanchions and dust seals from rocks and debris

$74.95
- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks
- Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

$34.95
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust.
- For mountain bike or wet road riding

$115.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure.
Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more.
- The axle shaft and axle end are precision CNC-machined.
- The axle shaft is 7075 aluminum and hard black-anodized for rugged durability.
- The stainless steel axle end allows for mounting of the hitch provided with your trailer.
- Hardware for attachment of the hitch is included; the hitch, itself, is not.
- No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.

$106.50
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

$89.95
- Protects high risk areas from rock chips, wear & scratches
- Designed around mountain bike geometry
- Fits all makes, models and sizes
- Designed for maximum coverage with minimal trimming
- Frame coverage ~60%. Includes toptube, downtube, 4 stays, seat tube, and extra pieces.
- Easy install and high durability
- Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth
- Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day
- A low surface energy means that less dirt sticks to your bike and is easier to clean
- 10 year warranty against discoloration and cracking
- Available in either matte or gloss finish to match factory paint and is nearly invisible once installed
- Made in Canada

$99.95
- Protects high risk areas from rock chips, wear & scratches
- Designed around e-mountain bike geometry
- Fits all makes, models and sizes
- Easy install and high durability
- Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth
- Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day
- A low surface energy means that less dirt sticks to your bike and is easier to clean
- 10 year warranty against discoloration and cracking
- Available in either matte or gloss finish to match factory paint and is nearly invisible once installed