Parts

- Soft and elastic for an easy mounting - Resistance to high pressure: 8 bar / 116 psi - High resistance to punctures - Sold by the unit

The Wolf Tooth 110 BCD Asymmetric Chainrings are designed for use with Shimano GRX cranks. Chainrings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. - Compatible with Shimano GRX cranksets including RX600 and RX810 - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life

Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075 Aluminum for long life - Use of a clutch-style rear derailleur is recommended

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 174mm - 1 axle per bag

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Shimano & SRAM compatible single speed conversion kit; polished silver. Includes: - (7) - 4.5mm spacers - (2) - 1mm shims

Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Bottom Bracket Includes: - BB Cups with bearings - 2 x Silicone dust seals - 2 x 0.5mm crank spindle spacers - 2 x 1.0mm crank spindle spacers - 1 x 2.5mm crank spindle spacer - Bearings: Enduro 6806/29 ABEC-3 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16-notch - Over Bearing Width: 91.5mm in a 68mm wide shell - Weight: 102g Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle: - ISO/English or BSA Threaded (1.37 in x 24 TPI) - 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

- Alex MD21 double wall 26'', disc specific rim, Black - Formula DC-20/DC-22 hubs - For All-Mountain and Cross-Country - Tubeless Ready - Inner rim width: 21mm - Outer rim width: 26mm - Rim height: 18 mm - Rim weight: 450 g - With eyelets - Schrader Valve - 32 holes - Sapim Leader Stainless spokes—Black

- Evo Tour 19 27.5" double wall rim - Black - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes - Silver - Cassette Compatibility: Shimano HG

- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula DC-20 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes

Rims: Evo Tour 19 26" - ETRTO 559-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Front hub: - QR 9x100mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals

Rims: Evo Tour 19 26" - ETRTO 559-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Rear hub: - QR 10x135mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals - HG freehub compatible with 8/9/10 speed

Rims: Evo Tour 19 700C / 29" - ETRTO 622-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Rear hub: - QR 10x135mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals - HG freehub compatible with 8/9/10 speed

Rims: EVO Tour 20 - 700C / 29'' (ETRTO 622) - Inner width: 19.8 mm - Recommended tire size range: 700C x 28 to 42 / 29" x 1.5'' to 2.25'' - Anodized black finish - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Alloy, Sealed, Quick Release, Hollow CrMo axle M9x100mm Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

Rims: EVO Tour 20 - 700C / 29'' (ETRTO 622) - Inner width: 19.8 mm - Recommended tire size range: 700C x 28 to 42 / 29" x 1.5'' to 2.25'' - Anodized black finish - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub (041821-02-700): Alloy, Sealed, Freewheel, Quick Release, Hollow CrMo axle M10x135mm Rear hub (041821-03-700): Alloy, Sealed, Shimano HG compatible Freehub, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano Deore FH-T610 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 24.5mm - Depth 20mm - Rim Model Mavic A719 - Skewers Included Yes

- Lighweight and reliable performance road rim brake wheelset with an all-black modern look - Mavic Open Elite rims offers Mavic's renown quality at a budget-friendly price - Traditional box-shaped rim with great lateral stiffness and vertical compliance - Single stainless steel eyelets - Shimano 105 R7000 hubs are lightweight, reliable and feature adjustable cup-and-cone bearings with polished races for superior, long lasting high performance - 32 black stainless steel spokes and black brass nipples for long term reliability and good looks

- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 15mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Sora FH-RS300 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 20.2mm - Depth 16mm - Rim Model Mavic Open Elite - Skewers Included Yes

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 15mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Sora HB-RS300 - Wheel Weight - - Spoke Type - - Valve Presta - Rim External Width 20.2mm - Depth 16mm - Rim Model Mavic Open Elite - Skewers Included Yes

- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type 12mm TA - Hub Spacing 142mm - Wheel-Brake Comp. Disc Center Lock - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 22mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano XT HB-M8010 - Wheel Weight - - Spoke Type Steel Blade-Black, DB 2.0 TO 1.5 - Valve Presta - Rim External Width 27mm - Depth 20mm - Rim Model Sun Inferno 27 - Skewers Included Yes

Rims: WTB DX18 26'' (ETRTO 559), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub (041812-02-26): Alloy, Freewheel, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Rear hub (041812-03-26): Alloy, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Rear hub (041810-02-26): Alloy, Freewheel, Sealed, Bolt-On, Solid CrMo axle 3/8'' x 135mm (L:175mm) - Anodized black finish - Adjustable bearings - Flange Nuts included

Rims: WTB DX18 700C / 29'' (ETRTO 622), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub (041813-02-700): Alloy, Freewheel, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black - Adjustable bearings - Quick Release Binders Incl. Rear hub (041813-03-700): Alloy, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black - Adjustable bearings - Quick Release Binders Incl. Rear hub (041813-04-700): Alloy, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x130mm - Anodized black - Adjustable bearings - Quick Release Binders Incl. Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Formula DC20 (Black), Laser etched logo, M9x100mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST - Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141 - HG Freehub compatible with 8-10, MTB 11-speed - 6-bolt disc mount - Sealed bearings (DC711 & DHT148) - TA Axles not incl. - Quick Release binder included (DC2241) - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Speaking for itself, Raddler is the radder version of our famed Riddler tread pattern. It combines the expeditious efficiency of a short-knob centerline with get-rad traction of chunky outer knobs. Let’s call it a semi-slick, but one designed to increase confidence while you’re pushing the limits of gravel. Raddler is an excellent choice for loose terrain where traction takes priority, but efficiency is never far behind. Lean it over, take the inside line, brake late, and stay pinned with the Raddler. FEATURES: - Short-knob center tread cuts down on rolling resistance while still providing enough bite for out-of-the-saddle traction. - Center and intermediate knobs on the Raddler are slightly taller than those of the original Riddler, thereby increasing tire lifespan without negatively affecting rolling efficiency. - Tall, toothy outer lugs ensure your favorite gravel descent doesn't unravel in the final corner. - Single-ply, 60tpi casing provides dependable protection at a minimal weight. - Available with black or tan sidewalls in 40mm and 44mm widths. - All Raddler tires are TCS tubeless compatible.

The Verdict family presents our most aggressive front-focused tires for days where relentless traction takes priority over rolling efficiency. Tall, chunky knobs dig deep into soft terrain regardless of how loose or sloppy it may be. Abundant open space between all knobs gives them room to dig through the driest days of summer and fling mud in the wettest months. The Verdict family is guilty of holding it down through off-camber corners and chundery descents. Verdict is the do-it-all spike designed to handle loose, technical trails. Its toothy knobs dig into soft terrain and grapple through rocks and roots. Dry and dusty during the loose summer months in California, Colorado or Italy? Go with the Verdict. PAIR IT WITH A JUDGE The Judge 2.4 rear tire compliments their usage with equally robust knobs that emphasis claw-like braking traction while also keeping rolling efficiency in mind. Looking to keep the front upright while you steer with the rear? That’s what you get with the Verdict/Judge combo. TRITEC AND SLASH GUARD: Verdict and Verdict Wet feature TriTec Compound, which utilizes three rubber compounds to provide different levels of traction, support, and durability based on their placement within the tread. The entire tread pattern is supported by a base of supportive rubber, which transitions halfway into the height of the knobs and allows for the use of softer knob compounds without folding under cornering forces. The tops of the center knobs consist of an intermediate compound to provide traction and durability without sacrificing rolling efficiency. Outer knobs feature a soft compound that delivers maximum grip and slow rebound. All TCS Light versions of the new Verdict tires feature Slash Guard technology, which incorporates a protective nylon insert spanning the entire sidewall to provide extra protection without the weight of a dual-ply casing. Verdict Wet is only available with a TCS Tough casing, and therefore, isn’t available with Slash Guard. FEATURES: - The Verdict tread pattern excels in loosest, rowdiest conditions where relentless traction takes priority over rolling efficiency. - Abundant open space between all knobs allows the tread pattern to dig through the driest days of summer and fling mud in the wettest months. - Pair it with the Judge 2.4 as a rear tire for claw-like braking traction that matches the tenacious grip of the Verdict tread. - Optimized for use with i29 rims.

The Corsa has been the race-day choice of pros for years and is now better than ever. The Corsa achieves the holy grail of performance: speed, suppleness, durability, and reliability. Whether winning a Grand Tour, or a local crit, the Corsa family delivers world-class performance. - 320 TPI Kevlar reinforced Corespun-K casing for increased sidewall protection - 4 separate Graphene rubber compounds

- Features a tread pattern similar to the Panaracer Smoke

- Features a tread pattern similar to the Panaracer Smoke

TruVativ's Howitzer Team Bottom Bracket is THE workhorse built for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.

TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Size: 26 x 1.9 – 2.125 - ISO Diameter: 559 / 26" mtn - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 170g (32mm), 171g (48mm)

- ISO Diameter: 559 / 26" MTN - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 26 x 1.9-2.125 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair

- BMX aluminum levers for caliper or U-brakes - 2-piece hinged clamp

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Shimano: - Deore BR-M575,BR-M525,BR-M515,BR-T615 - LX BR-T675 - Alivio BR-M4050 - Acera BR-M3050 - Altus BR-M375,BR-M365,BR-M315 - BR-M506 - BR-M505 - BR-MT500 - BR-M495 - BR-M486 - BR-M485 - BR-M475 - BR-M465 - BR-M447 - BR-M446 - BR-M445 - BR-M416 - BR-M415 - BR-MT400 - BR-M395 - BR-M355 TRP: - Hylex - HY/RD - Spyre SLC - Spyre - Spyke - Dash Sport Tektro: - Orion SL HD-M740 - Orion HD-M730,HD-M725 - Gemini SL HD-M520 / M521 - Gemini HD-M500 / M501,HD-M510 - Draco2 HD-M352 - HDC330 HD-M330 - Auriga HD-M290 / M291,HD-T530,HD-T525,HD-E530,HD-E525,HD-E520,HD-E500 - Aquila MD-M500 - Aries MD-M300 - MD-M280 - Mira MD-C400 - Volans HD-T710 - Vela HD-T290 - Dorado HD-E715 QUAD: - Disc Brake

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Shimano - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Classic collection celebrates cycling with the most recognized colors. - Super Sticky PU (top layer): Superior hand feel with long lasting performance. Extremely tacky advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. Embossed with the sacred geometric Supacaz pattern that maximizes grip and tackiness. - Kush Foam (middle layer): Exclusive compound that maximizes the Kush feel from the thinnest amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Tackiest/best hand feel - Long-lasting PU tape - Laser-etched aluminum bar plugs - High-end rubberized finishing tape - Material: PU - Length: 2160mm - Width: 30mm - Thickness: 3mm

- Steel cogs - Composite spacers

Replacement Shimano/SRAM aluminum freehub body for Stan's NoTubes 3.30HD rear hubs.

Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30HD rear hubs.

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. Rim strips and valves not included.

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

The low-profile, radially compliant alloy rim injected with SPANK's award-winning Vibrocore to add torsional strength and lateral stiffness offers a smooth and highly responsive ride feel. Hand-built to A-Class specifications, the 350 Vibrocore wheels with SPANK Hex Drive hub is the premium offer from the SPANK wheelhouse and is trusted by pros on the UCI DH World Cup and Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - Vibrocore inner well reduces the transmission of harmful vibration frequencies & increases the fatigue life of the rim - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles

Shimano's 105 10-Speed Cassette delivers excellent shifting and durability. The cogs are made of long-lasing, smooth-running steel. They have Shimano's engineered tooth shapes for precision shifting. And for lightness, the cassette has an aluminum carrier for the top cogs and nylon spacers.

Shimano 105 5750 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on compact double cranksets.

- Drivetrain Speeds: 11 - Chainring BCD: 110 Shimano Asymmetric - Material: Aluminum

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use