Tools/Maintenance

TB-1085: Removes Shimano® MF freewheels. Use with 21mm wrench or 1/2” Drive ratchet wrench. TB-1045: Removes Shimano® MF freewheels . Use with an adjustable” or 24 mm wrench. Available to work with TB-FW10 or TB –FW20 while disassembling. TB-1045 can be turned with TB-8830.

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit

The SRAM chain wear indicator tool is compatible with all the existing SRAM chain models and this includes HARD CHROME and non-HARD CHROME chain technology with a 0.8% wear critical specification.

DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes

- For installing DUB BSA bottom brackets - Compatible with a 3/8-inch drive torque wrench so you can torque to spec

Keep the ride alive with SKS's Toolbox Race. Its molded-plastic body provides an excellent gripping surface and splits in two for easy access. Included in the set are: 2, 2.5, 3, 4, 5, 6 and 8mm Allen keys; T20 and T25 Torx; 8 and 10mm ring spanners; flat and Phillips screwdrivers; two tire levers; and a 14/15g spoke wrench.

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

RockShox Seal Head Assemblies

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

- The original synthetic chain lube formulated specifically for mountain bikes. - New formula lasts even longer and is dye-free. - Superior wear protection, efficiency and durability for extreme conditions/mileage. - Unique detergents break down and isolate dirt protecting the surfaces of your chain. This is the product that started it all back in 1989. This breakthrough lubricant revolutionized the entire chain lube market. This full synthetic lubricant is designed to handle the harshest conditions and outlast other lubes in all conditions. Syn Lube is formulated with extreme pressure additives, corrosion inhibitors, and tackifiers to provide incredible wear protection, lubrication, and staying power in extreme wet and muddy conditions. Unique polymer detergents also work to break down dirt protecting the surfaces of your chain. Go ahead, play in the mud.

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.

The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.