Accessories

The All New 2021 Serfas® E-Lume Series Headlight New for 2021 our E-Lume Series Headlights feature a redesigned extruded aluminum housing, new optical lens with excellent side visibility, and improved battery capacity and LED performance. We made not only increased performance a priority but also improved rider visibility, so we designed an all new optical lens and housing with front corner cutouts to allow drastically more light be visible when viewed from either side – and this all without any reduction in quality of forward illumination or beam pattern. Constructed of aluminum the E-Lume housing is strong and lightweight as well as an efficient thermal conductor which effectively reduces heat buildup thus helping maintain temperatures for optimal battery performance and consistent light output. Light output of the E-Lume 350 is sent through a single optical lens creating a powerful beam with strong front illumination and excellent side visibility. Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable Specs: Solid Mode: - High – 350 Lumen / 3 hrs - Medium – 150 Lumen / 7 hrs - Low – 75 Lumen / 15 hrs Flash Mode: - Daytime Flash – 350 Lumen / 75 hrs - Low Flash – 50 Lumen / 90 hrs Weight : 142g w/ Bracket Battery: 1-Cell Li-Ion 1600 mah Charge Time: 2.5 hrs To Full At 700mA Using USB Wall Charger Color: Black

Coming up with ways to make you safer on the road, when using Serfas lights, is a top priority. Their "BLAST" Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10-minute runtime in that specific mode. How It Works: - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times.* - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - "Blast" Audible Warning System Alerts Rider Of Low Battery - Design Easily Fits Aero Applications - Low Flash Lasts Up To 14.5 hours - Extra Long Mounting Straps For Endless Mounting Options Specs: - Solids Modes: High (40 Lumens): 2.25 hrs & Low (10 Lumens): 7.75 hrs - Flash Modes: High (40 Lumens): 4 hrs & Low (10 Lumens): 15.25 hrs - Weight: 48 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer

DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes

SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit

The SRAM chain wear indicator tool is compatible with all the existing SRAM chain models and this includes HARD CHROME and non-HARD CHROME chain technology with a 0.8% wear critical specification.

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

The lightweight VELOCAGE weighs a mere 40 grams and features a sporty look, maintaining an absolutely secure hold, whether you're riding on the street or over rougher terrain. Its stable clamp and sturdy construction firmly encase the bottle on all sides. All commonly available bicycle bottles can be easily inserted and removed.

The Bottle Cage Adapter lets you fasten a bottle cage to any round tube on your bike. Angle adjustment ensures your bottle is always properly positioned.

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

Mudguard set for front and rear. – 45mm with fixed bridges – 3mm stainless steel stays – Front angle, sliding bridges, and fixed bridges made from stainless steel – Security fastening ASR joint, angle adjustable

Keep your pants clean with SKS's Chainboard chain guard. This handy device bolts onto the chainstay and bottom bracket, and utilizes a telescoping design to fit a wide variety of frames.

SKS's Rennkompressor Floor Pump is a legend. For over four decades, this German work of art has been the go-to pump for countless cyclists the world over. The E.V.A. head works with all valves and the 230 psi/16 bar max pressure can fill even the highest quality track tubulars. Sturdy aluminum construction, an oversize gauge, and a long hose will make it your go-to pump, as well.

SKS's Race Bag fastens to your saddle's rails and quickly detaches with a twist. Plenty of sizes ensure you can get one to fit your needs. A separate compartment for a multi-tool keeps your tube safe. And, the reflective accents add visibility in low-light situations.

SKS's Tool Wrap is made from sturdy nylon fabric and fastens easily to your bike's frame with Velcro straps. This tool wrap features individual compartments for your pump, mini tools, tire levers and more to keep your on-the-go repair essentials organized.

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Deep side skirts protect stanchions and dust seals from rocks and debris

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

RockShox Seal Head Assemblies

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

For riders looking for comprehensive coverage to protect high-risk areas of a dual-suspension eMTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Matte clear film - Fits all makes, models and sizes - Designed around e-mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension eMTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

- The original synthetic chain lube formulated specifically for mountain bikes. - New formula lasts even longer and is dye-free. - Superior wear protection, efficiency and durability for extreme conditions/mileage. - Unique detergents break down and isolate dirt protecting the surfaces of your chain. This is the product that started it all back in 1989. This breakthrough lubricant revolutionized the entire chain lube market. This full synthetic lubricant is designed to handle the harshest conditions and outlast other lubes in all conditions. Syn Lube is formulated with extreme pressure additives, corrosion inhibitors, and tackifiers to provide incredible wear protection, lubrication, and staying power in extreme wet and muddy conditions. Unique polymer detergents also work to break down dirt protecting the surfaces of your chain. Go ahead, play in the mud.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut